STAGE 3 | 330KW

$9,732.00
Product Code: #EVO X HPF STAGE 3 | 335kW
Install Time: 3 Days
Model Compatibility: Evo X
Note: This product can only be fitted at Diesel Tune Australia

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
217kW
291hp
335kW
449hp
+118kW
+158hp
TORQUE
366Nm
270ft-lb
510Nm
376ft-lb
+144Nm
106ft-lb
POWER
STANDARD 217 KW
291 hp
DYNO CHIPTUNING 335 KW
449 hp
DIFFERENCE +118 KW
158 hp
TORQUE
366 Nm
270 ft-lb
510 Nm
376 ft-lb
+144 Nm
106 ft-lb

EVO X | HPF STAGE 3 | 335KW

The EVO X Stage 3 upgrade starts with our trained technician fitting a high flow air filter, a BPT Evolution X-Dominator 2.0XT turbocharger, along with a silicone turbo inlet hose. We then install a stainless steel turbo outlet housing to the back of the new turbo and a stainless steel 3" turbo back exhaust system. We then install a higher flow fuel pump and injectors and get to tuning your vehicle's ECU on the dyno, maximizing all parameters including boost control, fuel, ignition timing, idle and enabling automatic water spray on all manual cars as from factory this set to only work when engine temp is above 105deg.

We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the HPF upgrade has made to your vehicle.

Package Includes

1 x Before dyno run
1 x High flow air filter
1 x Silicone turbo inlet hose
1 x Blouch RBK Dominator 2.0 bolt-on turbocharger
1 x Invidia Q300 Stainless steel 3″ 02 housing back exhaust
1 x Stainless steel 02 turbo outlet housing
1 x Set XS200 high flow fuel injectors
1 x DW300c high flow fuel pump
1 x ECU reprogram-factory ECU
1 x Labour to fit, tune and test

Key Features

Convert your Evo into a giant killer! Monstrous power and torque whilst retaining great on road manners.

Notes

    • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
    • *Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
    • Modifications such as this package require the vehicle to be in excellent mechanical order.
    • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
    • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
    • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
    • Images are for illustration purposes only.

    Enquire Here