HPF STAGE 1 | 315KW

$3,995.00
Product Code: #PATROL Y62 STAGE 1 | 315KW
Install Time: 1 Day
Model Compatibility: Y62 Patrol V8 5.6L
Note: This product can only be fitted at Diesel Tune Australia

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
298kW
400hp
315kW
422hp
+17kW
+23hp
TORQUE
560Nm
413ft-lb
585Nm
431ft-lb
+25Nm
18ft-lb
POWER
STANDARD 298 KW
400 hp
DYNO CHIPTUNING 315 KW
422 hp
DIFFERENCE +17 KW
23 hp
TORQUE
560 Nm
413 ft-lb
585 Nm
431 ft-lb
+25 Nm
18 ft-lb

PATROL Y62 STAGE 1 | 315KW

The HPF Y62 Patrol Stage-1 upgrade starts with our trained technician fitting a BMC high flow, serviceable air filter element and a Hurricane big boy 3.5” 409 Stainless steel ‘catback’ exhaust system which is more in line with what a 300kw V8 deserves. We then custom tune your vehicle's ECU on the dyno utilizing the latest PCM (Powertrain Control Module) tuning software to maximize power and torque and to optimize fuel efficiency. We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. This is all completed in a day and at the end of this upgrade you will be provided with a dyno graph detailing the power & torque increase of your vehicle.

  • Air filter element – From our testing there is no gain in performance by replacing the standard Nissan air box as it does not pose a restriction even in supercharged applications. Additionally, an aftermarket air box may also mess with the laminar flow of the air through the air flow meter which can cause tuning / driveability issues. We use a high flow serviceable air filter like a BMC or K&N filter to minimise filter restriction and it has the ability to be cleaned and reused almost indefinitely.
  • Dyno Tuning (Y62) – By optimizing the engine tune parameters in the vehicles PCM (Powertrain Control Module) to suit 98 octane fuel, we are able to increase both power and torque and maximise fuel economy however it’s worth noting that late model naturally aspirated cars are generally tuned very well from the manufacturer so depending on the vehicle platform mechanical parts to improve the engines intake & exhaust flow may need to be added to really get good gains. In its simplest form, to make more power by tuning any petrol engine we need to add ignition timing and optimise the air / fuel ratio (AFR). The PCM in the current Patrol is super smart and is constantly trying to add ignition timing to maximise engine efficiency. The PCM relies on knock sensors to determine how much timing it can add, it can also determine the quality of fuel and will adjust ignition timing automatically and seamlessly so running a chip device as an alternative to proper PCM tuning with so called selectable 98, 95, or 91 octane tunes is redundant as the factory PCM can already alter its tuning parameters for differing fuel octanes. It’s been widely rumoured that the air / fuel ratio at wide open throttle (WOT) in the Y62 Patrol is rich but its relevance has been larger overstated as this only happens above 130kph in attempt to protect the catalytic converters during sustained high-power requirements, we do not alter this unless aftermarket headers and cats are installed.
  • Catback Exhaust system – A ‘Catback’ system is basically all the parts of the exhaust after the catalytic converters. It’s the section of exhaust where all the mufflers are placed and by using larger diameter pipe and high flowing mufflers more performance and better sound is achieved. HPF works closely with our 2 major exhaust suppliers Pacemaker and Manta but for the Y62 we use Hurricane Headers out of Moorebank NSW as they build a single 3.5” system which is unique to the Y62 market. Hurricane Headers are Australian made and owned and have been since their inception over 45 years ago.

Package Includes

1 x BMC high flow air filter element
1 x Hurricane 3" into 3.5" cat back exhaust system
1 x Labour to fit, tune and test

Key Features

Modest power gains, optimisation of the tune to suit 98 octane fuel, with zero down sides.

Notes

  • Power figures are estimates only and actual figure's may vary.
  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only

Enquire Here