STAGE 3 | 240KW

TOYOTA PRADO 3.0L 150 SERIES | STAGE 3

The upgrade package starts with our trained technician fitting a new G-Turbo KD-250 Grunter Stage 2 turbocharger to the engine as one of the limiting factors when upgrading the 3.0L engine is the size of the standard turbocharger which dictates the peak power and torque the engine is capable of.

The G-Turbo turbocharger targets great low down response and the ability to carry the performance/boost efficiently throughout the rev range. The Grunter turbo has a high response turbine wheel, larger and more efficient compressor wheel, upgraded thrust bearings, 30% stronger main shaft and a higher flow VNT system. Its designed boost is 26psi and can be operated efficiently from 10-32psi max.

This all adds up to a super efficient, more responsive and ultimately more reliable turbo capable of flowing well over 20% more air with zero downsides. The G-Turbo turbocharger is also based of the factory turbo so it’s a direct fit and requires no other modifications to install.

We continue by fitting new 60% GTurbo changeover high fuel injectors to increase fuel injector capacity. A Pacemaker 3" turbo back exhaust system is then fitted to improve the engine's breathing and we complete the mechanical upgrades by fitting a Process West SEPR8R air oil separator to capture oil mist before it enters your engine's intake which can lead to a carbon build up in your engine's inlet manifold.

We bring the package together by custom tuning your vehicle's ECU on the dyno in real time utilizing the latest ECU tuning software to maximize power, torque and fuel efficiency and testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the upgrade has made to your vehicle.

PLEASE NOTE : The Horsepower Factory (HPF) has no affiliation with Toyota and service offered by our company may impact on your vehicle manufacturer warranty as well as the fuel efficiency and emissions of your vehicle.

Package Includes

1 x Process West Sepr8r Catch Can
4 x Gturbo Exchange 60% high flow fuel injectors & fitting kit
1 x Pacemaker 3" Turbo back exhaust (w/ Mufflers & cat)
1 x Gturbo KD-G250 Titan Turbocharger (change over)
1 x Custom ECU reprogram
1 x Before and after dyno graph
1 x Labour to fit, tune and test

Key Features

The Stage 3 package addresses the next level of components that limit power; generally this will be a turbocharger and associated hardware upgrade. The turbocharger upgrade is aimed at increasing air flow into the engine; this allows extra fuel to be added for more power and torque throughout the rev range. We still maintain our ‘reliability first protocol’ which maintains safe air fuel ratios and low EGT’s. 

Notes

*Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.

• We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
• Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
• Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
• Images are for illustration purposes only.

Enquire Here